Our Products

Sealers & Cleaners

Wax Remover

Water Based Wax Stripper

scroll down

Dubond’s Wax Remover is an alkaline stripper especially fit for the removal of old layers of natural and synthetic waxes. Wax Remover quickly removes the wax and it is ideal for the washing and the dressing of floor surfaces before the application of new emulsions, sealers or waxes. The concentrated nature of the product allows easy dissolving of old layers of polish, wax residues, dirt, oils and grease with the minimum of effort. Old tiled floors are easily renovated and brought back to their natural beauty with the three-step system of removal, impregnating and polishing. For large areas a suitable cleaning machine may be used.

  Download PDF

Areas of Application

All types of old floorings of tiles

Old polished floorings natural stone, marbel, granite, ceramic tiles, wooden floorings

Old waxed floorings of stone, marbel, granite, ceramic tiles, wooden floorings

Features & Benefits

Alkaline stripper especially fits for the removal of old layers of natural and synthetic waxes

Dissolves old layers of polish, wax residues, dirt, oils and grease with the minimum of effort

Works in three-step system of removal of a old wax & polish, impregnates and polishes the existing surface to be renovated and brought back to its natural beauty


Dilute Wax Remover 1: 10 with warm water for general cleaning. Dilute 1: 4 for particularly heavily soiled areas. When using a scrubbing machine, dilute 1: 50 or 1: 100 depending upon the level of cleaning required .

Apply the diluted solution to the floor area and leave to work for approximately 5-10 minutes depending on severity.

When using om porous surface such as terracotta tiles, brick etc. dampen with water prior to application to avoid cleaner being absorbed into the surface

Scrub the floor using a stiff brush or an abrasive pad to emulsify dirt.

Mop up excess liquid.

Throughly rinses the floor 2-3 times with clean water to remove all traces of cleaner. Any residues may leave surfaces slippery and could also have an effect on subsequent treatments, i.e. polishes etc.

Technical Information

Appearance Limpid Liquid
Color Transparent
Odor Fresh
pH (5% Solution) : 11–12
Spec. Gravity (20°C): 1,070 Gr. ⁄Cc
Biodegradability 90%
Flashing Point Not Flammable

Other Information


  • Wax remover is an alkaline product.
  • Do not use the pure product on polished marbles and stones.
  • For the first rines of these materials.
  • Do not use tile cleaner nor cement cleaner, rinse instead two times (at least) with clean water.


1 liter of Wax Remover cleans about 10 – 20 M2 of the surface.It shall depend upon the nature of the surface.


500ml, 1 Liter, 5 Liters & 20 Liters Containers.


12-24 months in original sealed packing kept in cool and dry place. Store in a dry place in the original container.

Fortuitous leakage and waste disposal method

In case material is released or spilled,clean up most of the the residue in plastic tanks neutralize with a solution of hydrochloric acid adjusting the ph to 6-7 then send to water conditioner or call for a specialized company personel.


Keep out of reach of children. wear suita immediately with plenty of clean water. in case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.

Quick Inquiry

Please enter name ! Please enter valid name !
Please enter 10 digits mobile no. ! Please enter valid mobile no. !
Please enter email id ! Please enter valid email id !