Hydroplast EGA 200

HYDROPLAST EGA 200 is an expanding grout admixture for pressure/injection grouting. By introducing into the concrete mix, wet volume expansion and increased fluidity without segregation are produced.

  • Application
  • Storage Life
  • Health and Safety
  • Uses
  • Direction for use
  • Value Base
  • Application
  • Storage Life
  • Health and Safety
  • Uses
  • Value Base
  • Dosage

Add directly to the cement I water mix in the mixer. Sand may be added as required.

6 months from date of production if stored properly in dry conditions in undamaged and unopened original sealed packaging. But after opening, it should be consumed within one month & should be packed properly after use.

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data. products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.

HYDROPLAST EGA 200 is used to increase flow and cohesion in cement grouts (addition of sand is possible) and to develop non-shrink property. This product can be used for grouting of:

  • Pre-stressed cable ducts
  • Rock and soil anchoring
  • Bearing Plates
  • Pre-placed aggregates
  • Tunnel linings

0.40% by weight of cement (200 gm per 50 kg bag of cement).

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

Add directly to the cement I water mix in the mixer. Sand may be added as required.

6 months from date of production if stored properly in dry conditions in undamaged and unopened original sealed packaging. But after opening, it should be consumed within one month & should be packed properly after use.

For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data. products, users shall refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety-related data.

HYDROPLAST EGA 200 is used to increase flow and cohesion in cement grouts (addition of sand is possible) and to develop non-shrink property. This product can be used for grouting of:

  • Pre-stressed cable ducts
  • Rock and soil anchoring
  • Bearing Plates
  • Pre-placed aggregates
  • Tunnel linings

All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

0.40% by weight of cement (200 gm per 50 kg bag of cement).