Hydro Cryston

HYDRO CRYSTON is a crystalline waterproofing admixture in a dry powder form that is added to the concrete mix at the time of batching. HYDRO CRYSTON can transform an entire concrete structure into an impermeable water barrier with lasting integral waterproofing properties. Active ingredients of HYDRO CRYSTON react with moisture to form crystals deep within the pores and capillary tract of the concrete structure. Used to waterproof both the interior and exterior of building, HYDRO CRYSTON prevents concrete decay and protects against moisture transmission, chemical attack and corrosion of reinforcing steel.

  • HYDRO CRYSTON is a permanent, non toxic product that is highly resistant to aggressive chemicals
  • An integral waterproofing system that is a permanent solution
  • The product can be added to concrete at the time of batching and is therefore not subject to climatic restraints
  • Process friendly and increases flexibility in construction scheduling
  • The product is ideal for concrete exposed to harsh conditions and enhances the durable properties of concrete as it protects the concrete from waterborne soluble salts
  • HYDRO CRYSTON can be used for positive and negative waterproofing of a structure
  • Gives concrete crack sealing characteristics, it can seal hairline crack up to 0.4 mm wide

  • Features & Benefits
  • Area Of Application
  • Application
  • Technical Details
  • Packaging
  • Storage Life
  • HYDRO CRYSTON is a permanent, non toxic product that is highly resistant to aggressive chemicals
  • An integral waterproofing system that is a permanent solution
  • The product can be added to concrete at the time of batching and is therefore not subject to climatic restraints
  • Process friendly and increases flexibility in construction scheduling
  • The product is ideal for concrete exposed to harsh conditions and enhances the durable properties of concrete as it protects the concrete from waterborne soluble salts
  • HYDRO CRYSTON can be used for positive and negative waterproofing of a structure
  • Gives concrete crack sealing characteristics, it can seal hairline crack up to 0.4 mm wide
  • Sewerage and water treatment plants
  • Tunnels
  • Dams
  • Precast structures
  • Reservoirs
  • Underground structures
  • Precast components
  • Foundations
  • Swimming pools
  • As site conditions and temperature variations commonly occur, DUBOND’s technical department is readily available to tailor make mix designs and dosages according to a customer’s requirements
  • HYDRO CRYSTON is added to concrete during the batching process. Directions may vary according to the type of batch plant operation and equipment used
  • The recommended dosage rate is between 0.8% and 1% of the cement weight
  • Ready-mix plant wet – the ratio must be 18 kg HYDRO CRYSTON to 8.1 litres of water or 25 kg of HYDRO CRYSTON to 11.3 litres of water ‒ this will form a slurry. Add to the wet concrete that is being batched in the truck to the required dosage of 0.8 or 1%. Batch the concrete as normal good practise requires, keeping in mind that the amount of water added to the HYDRO CRYSTON slurry should be subtracted from the batching water that needs to be added. Mix for at least five minutes in order to make sure that HYDRO CRYSTON is evenly distributed throughout the mix. Ready-mix plants dry–add HYDRO CRYSTON directly to the drum of the dry mix truck and then thoroughly mix the admixture with half of the required aggregate. Add the water, making sure that the product is distributed evenly throughout the mix water. Add the remaining half of the water and aggregate. Precast – Add HYDRO CRYSTON to coarse aggregate and fine aggregate and then mix thoroughly for 2-3 minutes before adding cement and water
  • The total quantity of the water to be added into the design mix should take into consideration the moisture content of both coarse and fine aggregates
  • The aggregate, cement and water should be batched according to standard practices
  • Colour - Grey
  • Specific gravity @ 25ºC - 1.3 Bulk
  • Physical state - Aggregated powder
  • Alkali content - < 0.35% Na2O
  • PH (working dilution) - > 12
  • Solubility of preparation in water - Partially soluble

18 kg & 25 kg

HYDRO CRYSTON will have a shelf life of 12 months, if stored in an unopened bag in a cool & dry place.

Related Products