Duplast SP

High-range, Water Reducing Super plasticizer for High Performance Concrete Mixes
Dubond's Duplast SP (Super Plasticizer) is composed of synthetic polymers specially designed to allow considerable reduction of mixing water while maintaining control on extend of set retardation. It is a prefen-ed admixture for triple blend binder system based High Performance Concrete (HPC) mixes or mixes containing micro silica or metakaolin.

  • Shelf Life
  • Advantage & Benefits
  • Uses
  • Direction for use
  • Safety Precautions
  • Technical Support

Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. For specific storage advice consult your local Dubond representative.

  • Better compaction and finishing by acting as viscosity modifier
  • Breaks the salinity of water by converting them into salt crystals
  • Chloride free
  • Extended setting with longer work ability
  • Good dispersion even in mixes with high fines
  • High work ability for longer periods
  • Higher cohesion
  • Higher ultimate strengths
  • Increased ease in finishing concrete
  • Increases extra bonding strength
  • Lower pumping pressure
  • Lowers cement content for increase in specified strength, work ability & durability
  • Reduce risk of honeycombing
  • Reduce risk of shrinkage cracks due to heat of hydration
  • Reduced permeability
  • Reduced thermal peaks
  • Reduced water content for a given work ability
  • Reduces the risk of rusting of reinforcement by breaking the chain of rust electrons
  • Resistance to segregation and bleeding even at high work ability
  • Concrete containing Silica fume/ Metakaolin
  • Congested/complex reinforced sections
  • Long-distance transporting
  • Low water/binder ratio mixes
  • Mixes requiring > 20% water reductions
  • Pre-cast concrete production
  • Pumped concrete
  • Ready mixed concrete

Duplast SP is a ready-to-use liquid which is dispensed into the concrete together with the mixing water. The plasticising effect and water reduction are higher if the admixture is added to the damp concrete after 50% to 70% of the mixing water has been added.

As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs (which can also be tainted with vapour until product fully cured or dried).

  • Treat splashes to eyes and skin immediately.
  • If accidentally ingested, seek immediate medical attention.
  • Keep away from children and animals.
  • Reseal containers after use.
  • Do not reuse containers for storage of consumable item.

For further information refer to the material safety data sheet. MSDS available on demand or on Dubond Products (India) Pvt Ltd web site.

Standards

  • ASTM C - 494"JYpe "G"
  • EN 934 - 2 : TII.I I I I.2
  • IS 9103