About Us

DUBOND Group is to become a truly global Indian Company. We share the common dream of all Indians to be a truly Indian multinational. And, we look forward to achieving that goal in the next decade.

Contact Info

C/3,1001 & 1002, Annushruti Tower,S.G. Highway, Thaltej, Ahmedabad, Gujarat, India - 380054.
info@dubond.in
+91 74860 13545
+91 79268 56815

AAC Block Adhesive

Dubond's AAC Block Adhesive is a versatile thin jointing material for laying AAC blocks, fly ash bricks, concrete blocks etc. The product is specially designed to provide higher bonding as a result of higher tensile adhesion strength. AAC Block Adhesive is pre-mixed, easy to apply high quality mortar comprising of cement, graded sand and admixtures. AAC Block Adhesive replaces conventional jointing mortar of 12-18 mm thickness with highly versatile 3-5 mm thickness.

Dubond's AAC Block Adhesive helps to speed up the build process and achieve the required insulation performance of AAC Blocks for the buildings. AAC Block Adhesive (Thin joint masonry) is a fast, clean, accurate system for construction using autoclaved aerated concrete blocks of close dimensional tolerance with 2mm - 3mm mortar joints.

Technical Data

Features & Benefits
Area Of Application
Application
Packaging
Shelf Life
Mixing

Thin jointing material with very high adhesion strength
Pre-mixed and ready-to-use. Only water is to be mixed at site
Economical. Eliminates lengthy and cumbersome processes of site mixing, thus transport and storage of all individual materials is avoided
Easy to mix and much faster application
Thin layer application results in structure being compact
No water curing is required after application
Minimizes the undulation of the surface
Being a thin layer, chances of water percolation is negligible
Being premixed, it saves considerable time and labour
Ready for subsequent application like plastering just after 24 hours of application
Eco-friendly product
Raw materials are processed, reducing the chances of efflorescence

Laying and jointing of fly ash bricks, cement blocks, hollow blocks, AAC blocks etc
Jointing of pre-stressed concrete slabs, panels
Parapet walls
Jointing of cement window and door frames
Garden and boundary walls

Layout the wall in which AAC Block Adhesive is to be used and mark openings like door, windows, any architectural appurtenances etc
Put a thin layer of AAC Block Adhesive in the thickness of 3 to 5mm on the clean and leveled surface using proper trowel on which the block work is to be carried out
Place the block on the laid AAC Block Adhesive in proper line and level
After placing the first block apply the AAC Block Adhesive of same thickness on both the sides of the block continuously keeping a check on the line and level
Clean the excess material, if any immediately. Continue the procedure for the entire block work

40kg PP laminated bags

Dubond's AAC Block Adhesive should be stored in a dry place. Shelf life is 6 months.

It is very important that AAC Block Adhesive is mixed with water properly and thoroughly before use
It is advisable to use a mechanical stirrer for uniform and thorough mixing to save time, labour and for maximum workability
Take a clean vessel/bucket, add water to it and put required quantity of AAC Block Adhesive in it
Mixing Ratio - Clean potable water (approximately 25%-30%) of the weight of the powder is required to be mixed depending upon the thickness of the product to be applied. Water is to be incrementally added in stages to get a smooth, uniform and workable mix. Allow ample of time for initial mixing
Ensure that no powder is left unmixed at the bottom of the vessel. The AAC Block Adhesive is now ready for application