Pure

Designed for ceramic floor and wall tiles for outdoor and indoor . The tiles can be make of cotta, double fire, single fire, ceramic. Floors and walls, for internal and external use, in domestic, industrial and commercial applications also in areas subject to freezing.

• Pure should be applied with a suitable toothed spreader, to be chosen according to the size and characteristics of the rear surface of the tiles. It is best to use the smooth part of the trowel to spread a fine initial layer, pressing down hard so as to obtain maximum adhesion to the substrate and to regulate water absorption, after which the thickness can be adjusted as required by tilting the spreader at an angle.
• Spread the adhesive over a surface area which will allow for laying of the surface materials within the indicated open time and check for suitability of the adhesive at regular intervals, the open time may vary considerably during the same operation, depending on various factors such as exposure to sunlight, air currents, absorbency of the substrate, temperature and relative humidity of the atmosphere.
• Press down each tile to allow for complete, uniform contact with the adhesive. In the case of laying in environments subject to heavy traffic or in outdoor locations, the double-spread technique must be used, to ensure 100% coverage of the rear of the tiles.
• In general, ceramic tiles do not require preliminary treatment, however these materials should properly anchored to the substrate or which may modify the absorption characteristics of the tiles.

• Colour : Light Grey
• Mixing Ration : 5.5 to 6.0 Ltrs/ Bag 20 Kg Pure
• Pot Life : ≥ 5 Hours
• Open Time : ≥ 30 Minutes
• Adjustability : ≥ 45 Minutes
• Bed Thickness : 3mm To 10mm
• Grouting : 8 Hours on wall / 24 hours on floor

5 & 20 Kg Bag.

12 month with original packing in dry storage condition.