Dubond’s Hydrobuild LW is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation. Hydrobuild LW is an integral waterproofing admixture for concrete and mortar which chemically converts the water soluble compounds present into concrete/mortar into stable water insoluble compounds. It is usedin all types of concrete/mortar requiring water impermeability. It is based on high performance polymers. Conforms to IS 2645 :2003 and IS 9103 – 2000 standards.
About Us
DUBOND Group is to become a truly global Indian Company. We share the common dream of all Indians to be a truly Indian multinational. And, we look forward to achieving that goal in the next decade.
Contact Info
- C/3,1001 & 1002, Annushruti Tower,S.G. Highway, Thaltej, Ahmedabad, Gujarat, India - 380054.
- info@dubond.in
- +91 74860 13545
- +91 79268 56815
Hydrobuild LW
Features & Benefits
Area Of Application
Technical Details
Packaging
Shelf Life
Method of Use
Health and Safety
Safety Precautions
- Increases Workability
- Easier Placing
- Better Compaction and Finishing by acting as Viscosity Modifer
- Lowers cement content for increase in specifed Strength, Workability & Durability
- Higher Cohesion
- Breaks the Salinity of Water by converting them into Salt Crystals
- Lower water requirement for given Workability
- Chloride free
- Increases Extra Bonding Strength
- Reduce risk of Segregation and Bleeding
- Reduce risk of Shrinkage Cracks due to Heat of Hydration
- Reduce risk of Honey Combing
- Corrosion resistant - reduces the risk of rusting of reinforcement by breaking the chain of Rust Electrons -
- Makes concrete more cohesive, hence protects steel better against corrosion
Waterproofing of concrete and sand-cement mortars used in :
- Basements
- Roof slabs and Screeds
- Water tanks & water retaining structures
- External Plastering
- Bathrooms and Balconies
- Sunk and Drains
| Properties | Specification | Result |
| Appearance | Free flowing liquid | |
| Colour | Wine red | |
| Specific gravity @ 25˚C | 1.05 ± 0.02 | |
| Non volatile content | 13 ± 0.05% | |
| pH value | 11 – 13 | |
| Setting time, minutes | Initial-100; Final-185 | |
| Chloride Content | IS : 2645 : 1975 | >0.0003 |
| Water Permeability | IS : 2645 : 1975 | >60 % of the control |
| Compressive Strength N /mm² | IS : 2645 : 1975 | As per the standard |
| Dosage | IS : 2645 : 1975 | 200 ml per 50 kg bag of cement |
200 ml, 1ltr, 5 ltr & 20 ltr container
Shelf life is 12 months from the date of manufacturing in unopened conditions. Store in a cool & dry place.
- Charge cement & aggregates to concrete mixer as per the mix design, mix in dry state for 12 minutes.
- Start addition of 75–80% mixing water & mix for 2-3 minutes.
- Hydrobuild LW is added as per the recommended dosage into the remaining mixing / gauging water,
- Then add to concrete mixer & mix for another 2 minutes.
- Place the concrete or apply plaster, as needed .
- Cure the applied mortar or concrete as per good construction practices.
Use rubber hand gloves & safety goggles, while using Hydrobuild LW. In case of contact with skin, wash with plenty of water. Keep out of reach of children.
- Do not add Hydrobuild LW directly to dry cement & aggregate mix. Maintain water-cement ratio as low as possible.
- Do not increase the dosage of Hydrobuild LW than the recommendation.
Related Products
