Dubond’s DU PLAST 20 is single component mortar with fine granulometry that forms a highly protective and fine finish on concrete. The thixotropic polymer based Du Plast 20 has correction range of thicknesses from 1 to 10 mm and has monolithic compactness and dimensional stability.
About Us
DUBOND Group is to become a truly global Indian Company. We share the common dream of all Indians to be a truly Indian multinational. And, we look forward to achieving that goal in the next decade.
Contact Info
- C/3,1001 & 1002, Annushruti Tower,S.G. Highway, Thaltej, Ahmedabad, Gujarat, India - 380054.
- info@dubond.in
- +91 74860 13545
- +91 79268 56815
DU Plast 20
Area Of Application
Application
Technical Details
Packaging
Shelf Life
DU Plast 20 is suitable for internal use for high resistance correcting (1mm to 10 mm) of irregular and undulated substrates to be made ready for ceramics, homogeneous tiles, marbles parquet and resilient materials.
- Levelling of uneven walls made of concrete or cementitious plaster in interior or exterior
- Smoothing of substrates consisting of concrete, stone, brick, cement blocks or cementitious plaster of adequate mechanical strength, in interiors/exteriors for improved adhesion.
- Reinforced plaster for consolidating unsound masonry imrpoved bonding to smooth substrates with low absorbency.
- Compensates shrinkage.
- High durability to aggresive substrates such as sulphates and chlorides.
- It is impermeable to rains and has calibrated shrinkage.
- The fluidifying agents reduces water/cement ratio while interstitial crystallizing agent provide stable chemical structurethat is resistant to carbonation, nitrates, sulphates and chloride attracts.
Apply Du Plast 20 with a smooth spreader. The high level of thixotropy of the mixture allows for high finishing thicknesses with just one coating. It is generally advisable to apply an initial fine layer, pressing the product down to obtain maximum adhesion to the substrate and to adjust water absorption of subsequent layers. The appearance of the finish will vary depending on whether a smooth steel spreader or a sponge spreader has been used for application. For subsequent laying of ceramics tiles it is always advisable to obtain a roughened, porous surface.
| Properties | Specification | Result |
| Mixing Water | 5.5 Ltr. / Bag 25 kg. | |
| Mixture Spread | > 75% | > EN 13395-1 |
| Specific Weight of the mixture | > 1.94 kg / Dm3 | UN 17121 |
| pH of mixture | ~12 | |
| Pot Life | > 1 Hour | |
| Temperature range of application. | From +5° C to +35° C | |
| Min. Thickness | 1 mm | |
| Max. Thickness Achievable by coat | 3 mm | |
| Max. Thickness Achievable | 10 mm |
25 Kg of Bag.
12 months in the original packaging in dry environment
